Dynamic Trends in Surgical Oromaxillofacial Trauma Epidemiology: A Comparative Study of Pre-COVID-19 and COVID-19 Periods in Tertiary Referral Hospitals in Madrid.

Introduction: The COVID-19 pandemic has induced profound societal and healthcare transformations globally. Material and methods: This multicenter retrospective study aimed to assess potential shifts in the epidemiology and management of oromaxillofacial trauma requiring surgical intervention over a 1-year period encompassing the onset of the COVID-19 pandemic, in comparison to the preceding year. The parameters investigated included age, sex, injury mechanisms, fractured bones, and treatment modalities. The statistical significance was set at p < 0.05. Results: A notable 39.36% reduction in oromaxillofacial fractures was identified (p < 0.001), with no significant alterations in sex distribution, types of fractured bones, or treatment modalities. An appreciable increase in mean age was observed (35.92 vs. 40.26) (p = 0.006). Analysis of the causes of oromaxillofacial trauma revealed diminished incidents of interpersonal violence (41% vs. 35%) and sports-related injuries (14% vs. 8%), alongside an escalation in cases attributed to falls (27% vs. 35%), precipitation events (2% vs. 5%), and traffic accidents (12% vs. 13%). The mandible emerged as the most frequently fractured bone. Conclusion: In conclusion, the COVID-19 pandemic has decreased the number of maxillofacial fractures treated surgically and has changed the epidemiology and the etiology of facial traumas.

Virtual Surgical Planning for Temporomandibular Joint Reconstruction with Stock TMJ Prostheses: Pilot Study.

The temporomandibular joint (TMJ) is one of the most complex joints in the human anatomy. In advanced degenerative stages, conservative or minimally invasive surgical therapies have failed to restore joint function, and joint replacement with prostheses has been required. Stock prostheses, compared to custom-made prostheses, are much less expensive and require less pre-operative preparation time. Four patients followed for years for temporomandibular dysfunction and previously operated on by arthroscopy or open joint surgery that have been reconstructed with stock TMJ prostheses (STMJP) through virtual surgical planning (VSP) and an STL model with surgical and positioning guides were included. The median follow-up was 15 months; the median number of previous TMJ surgeries was 2. The mean preoperative MIO was 24.6 mm and at longest follow-up was 36.4 mm. The median preoperative TMJ pain score was 8, and the median postoperative TMJ pain was 3. All patients have improved their mandibular function with a clear improvement of their initial situation. In conclusion, we believe that stock TMJ prostheses with virtual surgical planning and surgical guides are a good alternative for TMJ reconstruction at the present time. Nonetheless, prospective and randomized trials are required with long-term follow up to assess their performance and safety.

Guided Genioplasty: Comparison between Conventional Technique and Customized Guided Surgery.

BACKGROUND: Genioplasty as an isolated surgical technique is a highly demanded procedure in the maxillofacial surgery area. Advances in facial reconstructive surgery have been associated with less morbidity and more predictable results. In this paper, "conventional" genioplasty and genioplasty by means of virtual surgical planning (VSP), CAD-CAM cutting guides, and patient custom-made plates are compared. METHODS: A descriptive observational study was designed and implemented, and 43 patients were treated, differentiating two groups according to the technique: 18 patients were treated by conventional surgery, and 25 patients were treated through virtual surgical planning (VSP), CAD-CAM cutting guides, STL models, and titanium patient-specific plates. RESULTS: The operation time ranged from 35 to 107 min. The mean operative time in the conventional group was 60.06 + 3.74 min.; in the custom treatment group it was 42.24 + 1.29 min (p < 0.001). The difference between planned and obtained chin changes in cases of advancement or retrusion was not statistically significant (p = 0.125; p = 0.216). In cases of chin rotation due to asymmetry, guided and personalized surgery was superior to conventional surgery (p < 0.01). The mean hospital stay was equal in both groups. A decrease in surgical complications was observed in the group undergoing VSP and customized treatment. CONCLUSIONS: Multi-stage implementation of VSP with CAD-CAM cutting guides, STL models, and patient-specific plates increased the accuracy of the genioplasty surgery, particularly in cases of chin asymmetry, reducing operation time and potential complications.

Depth of Invasion: Influence of the Latest TNM Classification on the Prognosis of Clinical Early Stages of Oral Tongue Squamous Cell Carcinoma and Its Association with Other Histological Risk Factors.

BACKGROUND: The American Joint Committee on Cancer (AJCC), in its 8th edition, introduces modifications to the previous TNM classification, incorporating tumour depth of invasion (DOI). The aim of this research is to analyse the prognosis (in terms of disease-free survival and overall survival) of clinical early stage (I and II) squamous cell carcinomas of the oral tongue according to the DOI levels established by the AJCC in its latest TNM classification to assess changes to the T category and global staging system and to evaluate the association between DOI and other histological risk factors. METHODS: A retrospective longitudinal observational study of a series of cases was designed. All patients were treated with upfront surgery at our institution between 2010 and 2019. The variables of interest were defined and classified into four groups: demographic, clinical, histological and evolutive control. Univariate and multivariate analyses were carried out and survival functions were calculated using the Kaplan-Meier method. Statistical significance was established for p values below 0.05. RESULTS: Sixty-one patients were included. The average follow-up time was 47.42 months. Fifteen patients presented a loco-regional relapse (24.59%) and five developed distant disease (8.19%). Twelve patients died (19.67%). Statistically significant differences were observed, with respect to disease-free survival (p = 0.043), but not with respect to overall survival (p = 0.139). A total of 49.1% of the sample upstaged their T category and 29.5% underwent modifications of their global stage. The analysis of the relationship between DOI with other histological variables showed a significant association with the presence of pathological cervical nodes (p = 0.012), perineural invasion (p = 0.004) and tumour differentiation grade (p = 0.034). Multivariate analysis showed association between depth of invasion and perineural invasion. CONCLUSIONS: Depth of invasion is a histological risk factor in early clinical stages of oral tongue squamous cell carcinoma. Depth of invasion impacts negatively on patient prognosis, is capable per se of modifying the T category and the global tumour staging, and is associated with the presence of cervical metastatic disease, perineural invasion and tumoural differentiation grade.

Survival rate of odontogenic descending necrotizing mediastinitis. Our experience in last 5 years

Background: Descending necrotising mediastinitis is one of the most lethal and least frequent forms of mediastinitis. It is a life-threatening infection most frequently originating from an oropharyngeal or odontogenic infection.Material and methods: A retrospective study of 6 patients diagnosed and treated for descending necrotising mediastinitis between 2015 and 2020 is reported.Results: All patients were male, mean age of 34.83 years; 66% were smokers. 83% had an orocervical infection and 34% had initial mediastinal spread. All patients were treated initially with empirical broad-spectrum antibiotics and surgical drainage, with subsequent admission to the Intensive Care Unit; only one of them required tracheostomy. The mean hospital stay was 27.37 days. After a mean follow-up of 6 months, 100% of the cases had a complete recovery.Conclusions: Early diagnosis and surgical treatment combined with improved life-support treatment in intensive care units and broad-spectrum antibiotic therapy leads to a decrease in associated mortality. (AU)

Assessment of Quality of Life in Head-and-Neck Oncologic Patients with Intraoral Soft-Tissue Defects Reconstructed with Buccinator Myomucosal Flap.

The aim of this study is to evaluate the functional outcomes and quality of life (QoL) in oncologic patients with intraoral defects reconstructed with the buccinator myomucosal flap. A retrospective study was performed involving 39 patients with intraoral soft-tissue defects, reconstructed with a buccinator myomucosal flap during a six-year period. Patients completed the European Organization for Research and Treatment of Cancer questionnaires, the standard questionnaire (QLQ-C30) and the head-and-neck specific module (QLQ-H&N35). Thirty-nine patients with a mean age of 61.23 ± 15.80 years were included in the study. Thirty-three patients were diagnosed with an oncological condition (84.61%). Six patients (15.38%) developed orosinusal communication and underwent extensive debridement. The median global-health-status score was 79.27 and emotional performance was the lowest scoring, with a mean score of 76.93. As for the symptom items, the most outstanding were dental problems (33.33), oral opening (31.62) and dry mouth (37.61), followed by sticky saliva (24.79), problems with social eating (21.15) and pain (19.87). The most significant symptoms were radiotherapy-related adverse effects such as pain, fatigue, dental problems and dry mouth. Patients reconstructed with the buccinator myomucosal flap develop a good quality of life for all types of activities, and a correct function and aesthetics. Postoperative radiotherapy is associated with a poorer quality of life, and can lead to impairment of several symptoms such as swallowing, oral opening and dry mouth.

Virtual Surgical Planning and Customized Subperiosteal Titanium Maxillary Implant (CSTMI) for Three Dimensional Reconstruction and Dental Implants of Maxillary Defects after Oncological Resection: Case Series.

Maxillectomies cause malocclusion, masticatory disorders, swallowing disorders and poor nasolabial projection, with consequent esthetic and functional sequelae. Reconstruction can be achieved with conventional approaches, such as closure of the maxillary defect by microvascular free flap surgery or prosthetic obturation. Four patients with segmental maxillary defects that had been reconstructed with customized subperiosteal titanium maxillary implants (CSTMI) through virtual surgical planning (VSP), STL models and CAD/CAM titanium mesh were included. The smallest maxillary defect was 4.1 cm and the largest defect was 9.6 cm, with an average of 7.1 cm. The reconstructed maxillary vertical dimension ranged from 9.3 mm to 17.4 mm, with a mean of 13.17 mm. The transverse dimension of the maxilla at the crestal level was attempted to be reconstructed based on the pre-excision CT scan, and these measurements ranged from 6.5 mm in the premaxilla area to 14.6 mm at the posterior level. All patients were rehabilitated with a fixed prosthesis on subperiosteal implants with good esthetic and functional results. In conclusion, we believe that customized subperiosteal titanium maxillary implants (CSTMI) are a safe alternative for maxillary defects reconstruction, allowing for simultaneous dental rehabilitation while restoring midface projection. Nonetheless, prospective and randomized trials are required with long-term follow-up, to assess its long-term performance and safety.

Intraosseous Venous Malformation of the Zygomatic Bone: Comparison between Virtual Surgical Planning and Standard Surgery with Review of the Literature.

Intraosseous venous malformations affecting the zygomatic bone are infrequent. Primary reconstruction is usually accomplished with calvarial grafts, although the use of virtual surgical planning, cutting guides and patient-specific implants (PSI) have had a major development in recent years. A retrospective study was designed and implemented in patients diagnosed with intraosseous venous malformation during 2006-2021, and a review of the scientific literature was also performed to clarify diagnostic terms. Eight patients were treated, differentiating two groups according to the technique: four patients were treated through standard surgery with resection and primary reconstruction of the defect with calvarial graft, and four patients underwent resection and primary reconstruction through virtual surgical planning (VSP), cutting guides, STL models developed with CAD-CAM technology and PSI (titanium or Polyether-ether-ketone). In the group treated with standard surgery, 75% of the patients developed sequelae or morbidity associated with this technique. The operation time ranged from 175 min to 210 min (average 188.7 min), the length of hospital ranged from 4 days to 6 days (average 4.75 days) and the postoperative CT scan showed a defect surface coverage of 79.75%. The aesthetic results were "excellent" in 25% of the patients, "good" in 50% and "poor" in 25%. In the VSP group, 25% presented sequelae associated with surgical treatment. The operation time ranged from 99 min to 143 min (average 121 min), the length of hospital stay ranged from 1 to 2 days (average of 1.75 days) and 75% of the patients reported "excellent" results. Postoperative CT scan showed 100% coverage of the defect surface in the VSP group. The multi-stage implementation of virtual surgical planning with cutting guides, STL models and patient-specific implants increases the reconstructive accuracy in the treatment of patients diagnosed with intraosseous venous malformation of the zygomatic bone, reducing sequelae, operation time and average hospital stay, providing a better cover of the defect, and improving the precision of the reconstruction and the aesthetic results compared to standard technique.

Mandibular Reconstruction With Fibula Flap and Dental Implants Through Virtual Surgical Planning and Three Different Techniques: Double-Barrel Flap, Implant Dynamic Navigation and CAD/CAM Mesh With Iliac Crest Graft.

INTRODUCTION: Vertical discrepancy between the fibula flap and the native mandible results in difficult prosthetic rehabilitation. The aim of this study was to evaluate the outcomes of 3D reconstruction of the mandible in oncologic patients using three different techniques through virtual surgical planning (VSP), cutting guides, customized titanium mesh and plates with CAD/CAM technology, STL models and intraoperative dynamic navigation for implant placement. Material and methods. MATERIAL AND METHODS: Three different techniques for mandibular reconstruction and implant rehabilitation were performed in 14 oncologic patients. Five patients (36%) underwent VSP, cutting guides, STL models and a customized double-barrel titanium plate with a double-barrel flap and immediate implants. In six patients (43%), VSP, STL models and a custom-made titanium mesh (CAD/CAM) for 3D reconstruction with iliac crest graft over a fibula flap with deferred dental implants were performed. Three patients (21%) underwent VSP with cutting guides and customized titanium plates for mandibular reconstruction and implant rehabilitation using intraoperative dynamic navigation was accomplished. Vertical bone reconstruction, peri-implant bone resorption, implant success rate, effects of radiotherapy in vertical reconstruction, bone resorption and implant failure, mastication, aesthetic result and dysphagia were evaluated. RESULTS: Significant differences in bone growth between the double-barrel technique and iliac crest graft with titanium mesh technique were found (p<0.002). Regarding bone resorption, there were no significant differences between the techniques (p=0.11). 60 implants were placed with an osseointegration rate of 91.49%. Five implants were lost during the osseointegration period (8%). Peri-implant bone resorption was measured with a mean of 1.27 mm. There was no significant difference between the vertical gain technique used and implant survival (p>0.385). Implant survival rates were higher in non-irradiated patients (p<0.017). All patients were rehabilitated with a fixed implant-supported prosthesis reporting a regular diet (80%), normal swallowing (85.7%) and excellent aesthetic results. CONCLUSIONS: Multi-stage implementation of VSP, STL models and cutting guides, CAD/CAM technology, customized plates and in-house dynamic implant navigation for mandibular defects increases bone-to-bone contact, resolves vertical discrepancy and improves operative efficiency with reduced complication rates and minimal bone resorption. It provides accurate reconstruction that optimizes implant placement, thereby improving facial symmetry, aesthetics and function.

Clinical and Surgical Outcomes in Extensive Scalp Reconstruction after Oncologic Resection: A Comparison of Anterolateral Thigh, Latissimus Dorsi and Omental Free Flaps.

Microsurgical scalp reconstruction is indicated in patients with large scalp defects. The aim of this study was to compare the outcomes of scalp reconstruction in oncologic patients reconstructed with latissimus dorsi (LD), anterolateral thigh (ALT), and omental (OM) free flaps. Thirty oncologic patients underwent scalp reconstruction with LD (10), ALT (11), and OM (9) flaps. The length of the vascular pedicle, the operation time, the possibility of a two-team approach, the length of hospital stays, the complications, and the aesthetic results were evaluated. The OM flap was the flap with the shortest vascular pedicle length with a mean of 6.26 ± 0.16 cm, compared to the LD flap, which was 12.34 ± 0.55 cm and the ALT flap with 13.20 ± 0.26 cm (p < 0.05). The average time of surgery was 6.6 ± 0.14 h in patients reconstructed with OM, compared to the LD flap, which was 8.91 ± 0.32 h and the ALT flap with 7.53 ± 0.22 h (p < 0.05). A two-team approach was performed in all patients for OM flaps and ALT flaps, but only in two patients reconstructed with the LD flap (p < 0.001). In patients reconstructed with the OM flap, a very satisfactory or satisfactory result was reported in seven patients (77.8%). Eight patients reported a very unsatisfactory or unsatisfactory result with LD flap (80%) and 10 patients with ALT flap (90.9%) (p = 0.002). The mean hospital stay after surgery was not statistically significant (p > 0.05). As for complications, two patients reconstructed with OM flap, five LT flaps, and two ALT flaps developed complications, not statistically significant (p = 0.235). Omental flap, latissimus dorsi flap, and anterolateral thigh flap fulfill most of the characteristics for complex scalp reconstruction. The decision on which flap to use should be based on clinical aspects of the patients taking into account that the three flaps show similar rates of complications and length of hospital stay. Regarding the aesthetic outcome, OM flap or LD flap should be considered for reconstruction of extensive scalp defects.

Functional Outcomes with Facial Artery Musculo-Mucosal (FAMM) Flap and Dental Implants for Reconstruction of Floor of the Mouth and Tongue Defects in Oncologic Patients.

Optimal functional outcomes in oncologic patients with squamous cell carcinoma (SCCA) of the tongue and floor of the mouth require good lingual mobility, adequate facial competence, the cheek suction effect and dental rehabilitation with osseointegrated implants. In this study, twenty-two oncologic patients who had been diagnosed with intraoral SCCA affecting the tongue and the floor of the mouth and who had undergone wide resection of the tumor and immediate reconstruction with an inferiorly pedicled FAMM flap and immediate osseointegrated implants were assessed. Lingual mobility, speech articulation, deglutition, implant success rate, mouth opening, and aesthetic results were evaluated. All patients were staged as T2 and the defect size ranged from 3.7 × 2.1 cm to 6.3 × 4.2 cm. A selective neck dissection was performed in all patients as part of their oncologic treatment, either electively or for node positive disease. Thirteen patients (59%) were diagnosed with node positive disease and underwent adjuvant radiotherapy. A total of 101 osseointegrated implants were placed for prosthetic rehabilitation and 8 implants were lost (7.9%), of which 7 received radiotherapy (87.5%). The implant success rate was 92.1%. Mouth opening was reported as normal in 19 patients (86.3%). Tongue tip elevation was reported as excellent in 19 patients (86.3%) and good in 3 patients (13.6%). Lingual protrusion was referred to as excellent in 15 patients (68.2%) and good in 6 patients (27.2%). Lateral excursion was reported as excellent in 14 patients (63.6%) and good in 7 patients (31.8%). In terms of speech articulation, 20 patients reported normal speech (90.9%). Regarding deglutition, 19 patients (86.3%) reported a regular diet while a soft diet was reported by 3 patients (13.7%). Aesthetic results were referred to as excellent in 17 patients (77.3%). FAMM flaps, immediate implants and fixed prostheses enable the functional rehabilitation of oncologic patients, optimizing aesthetics and functional outcomes even in patients undergoing irradiation, thus returning oncologic patients to an excellent quality of life.

Virtual Surgical Planning, Stereolitographic Models and CAD/CAM Titanium Mesh for Three-Dimensional Reconstruction of Fibula Flap with Iliac Crest Graft and Dental Implants.

Mandibular reconstruction with fibula flap shows a 3D discrepancy between the fibula and the remnant mandible. Eight patients underwent three-dimensional reconstruction of the fibula flap with iliac crest graft and dental implants through virtual surgical planning (VSP), stereolitographic models (STL) and CAD/CAM titanium mesh. Vertical ridge augmentation and horizontal dimensions of the fibula, peri-implant bone resorption of the iliac crest graft, implant success rate and functional and aesthetic results were evaluated. Vertical reconstruction ranged from 13.4 mm to 10.1 mm, with an average of 12.22 mm. Iliac crest graft and titanium mesh were able to preserve the width of the fibula, which ranged from 8.9 mm to 11.7 mm, with an average of 10.1 mm. A total of 38 implants were placed in the new mandible, with an average of 4.75 ± 0.4 implants per patient and an osseointegration success rate of 94.7%. Two implants were lost during the osseointegration period (5.3%). Bone resorption was measured as peri-implant bone resorption at the mesial and distal level of each implant, with a variation between 0.5 mm and 2.4 mm, and with a mean of 1.43 mm. All patients were rehabilitated with a fixed implant prosthesis with good aesthetic and functional results.

Primary Maxillary Reconstruction With Fibula Flap and Dental Implants: A Comparative Study Between Virtual Surgical Planning and Standard Surgery in Class IIC Defects.

PURPOSE: Oncological patients who undergo bilateral subtotal maxillectomies develop functional and esthetic sequelae that require immediate reconstruction. The purpose of this study is to evaluate the primary reconstruction of maxillary defects with fibula flap and dental implants assisted by virtual surgical planning (VSP) and to assess the postoperative outcomes compared with standard surgery. MATERIAL AND METHODS: A retrospective study was designed between January 2016 and April 2020 with 12 oncologic patients who underwent subtotal bilateral maxillectomy. Six consecutive patients were treated by standard surgical procedure (SS) at the beginning of the study. In 2018, the VSP was implemented, and 6 consecutive patients were treated using this technique. All patients were rehabilitated with Ticare implants and implant prostheses. Anatomic position of the bone, bone apposition, change of vertical distance, and horizontal shift, the operative and ischemia time, the esthetic results, and the functional rehabilitation were evaluated and compared. RESULTS: The position of the bone in anatomical position was 100% in the VSP group vs 66% in the SS group. The bone apposition was 100% in the VSP group vs 83.3%. The change of vertical distance and the horizontal shift were lower in the VSP group (P < .05). The ischemia time and operative time were shorter in the VSP group (P < .05). A good esthetic result was achieved in 83.3% in the VSP group vs 33.3% in the SS group; 81 dental implants and 1 zygomatic implant were placed. The success rate was 95% in the VSP group and 92.6% in the SS group. All patients were rehabilitated with implant prosthesis. CONCLUSIONS: VSP improves the accuracy of midface reconstruction (class IIC defect) with a better anatomical position of the bone, a higher rate of bone contact, and a lower change in vertical distance compared with standard surgery. It significantly improves the esthetic result, reduces ischemia time, and operation time.

Computer-Assisted Dental Implant Placement Following Free Flap Reconstruction: Virtual Planning, CAD/CAM Templates, Dynamic Navigation and Augmented Reality.

Image-guided surgery, prosthetic-based virtual planning, 3D printing, and CAD/CAM technology are changing head and neck ablative and reconstructive surgical oncology. Due to quality-of-life improvement, dental implant rehabilitation could be considered in every patient treated with curative intent. Accurate implant placement is mandatory for prosthesis long-term stability and success in oncologic patients. We present a prospective study, with a novel workflow, comprising 11 patients reconstructed with free flaps and 56 osseointegrated implants placed in bone flaps or remnant jaws (iliac crest, fibula, radial forearm, anterolateral thigh). Starting from CT data and jaw plaster model scanning, virtual dental prosthesis was designed. Then prosthetically driven dental implacement was also virtually planned and transferred to the patient by means of intraoperative infrared optical navigation (first four patients), and a combination of conventional static teeth supported 3D-printed acrylic guide stent, intraoperative dynamic navigation, and augmented reality for final intraoperative verification (last 7 patients). Coronal, apical, and angular deviation between virtual surgical planning and final guided intraoperative position was measured on each implant. There is a clear learning curve for surgeons when applying guided methods. Initial only-navigated cases achieved low accuracy but were comparable to non-guided freehand positioning due to jig registration instability. Subsequent dynamic navigation cases combining highly stable acrylic static guides as reference and registration markers result in the highest accuracy with a 1-1.5-mm deviation at the insertion point. Smartphone-based augmented reality visualization is a valuable tool for intraoperative visualization and final verification, although it is still a difficult technique for guiding surgery. A fixed screw-retained ideal dental prosthesis was achieved in every case as virtually planned. Implant placement, the final step in free flap oncological reconstruction, could be accurately planned and placed with image-guided surgery, 3D printing, and CAD/CAM technology. The learning curve could be overcome with preclinical laboratory training, but virtually designed and 3D-printed tracer registration stability is crucial for accurate and predictable results. Applying these concepts to our difficult oncologic patient subgroup with deep anatomic alterations ended in comparable results as those reported in non-oncologic patients.

Vertical Ridge Augmentation of Fibula Flap in Mandibular Reconstruction: A Comparison between Vertical Distraction, Double-Barrel Flap and Iliac Crest Graft.

Double-barrel flap, vertical distraction and iliac crest graft are used to reconstruct the vertical height of the fibula. Twenty-four patients with fibula flap were reconstructed comparing these techniques (eight patients in each group) in terms of height of bone, bone resorption, implant success rate and the effects of radiotherapy. The increase in vertical bone with vertical distraction, double-barrel flap and iliac crest was 12.5 ± 0.78 mm, 18.5 ± 0.5 mm, and 17.75 ± 0.6 mm, (p < 0.001). The perimplant bone resorption was 2.31 ± 0.12 mm, 1.23 ± 0.09 mm and 1.43 ± 0.042 mm (p < 0.001), respectively. There were significant differences in vertical bone reconstruction and bone resorption between double-barrel flap and vertical distraction and between iliac crest and vertical distraction (p < 0.001). The study did not show significant differences in implant failure (p = 0.346). Radiotherapy did not affect vertical bone reconstruction (p = 0.125) or bone resorption (p = 0.237) but it showed higher implant failure in radiated patients (p = 0.015). The double-barrel flap and iliac crest graft showed better stability in the height of bone and less bone resorption and higher implant success rates compared with vertical distraction. Radiation therapy did not affect the vertical bone reconstruction but resulted in a higher implant failure.

Mandibular reconstruction with iliac crest free flap, nasolabial flap, and osseointegrated implants.

PURPOSE: Oncologic patients undergoing segmental mandibulectomy with soft tissue resection develop several esthetic and functional sequelae; therefore, the defect must be reconstructed immediately. The iliac crest flap is the only flap that allows reconstruction of the previous dimensions of the mandible. However, the excessive soft tissue of this flap prevents optimal reconstruction of intraoral soft tissue defects. MATERIALS AND METHODS: This report describes a reconstructive technique used in 12 patients who underwent segmental mandibulectomy because of soft tissue defects resulting from tumor resection. The technique involves reconstruction of the mandible using an iliac crest flap combined with a nasolabial flap to enable subsequent reconstruction of the intraoral soft tissue and immediate placement of osseointegrated implants. RESULTS: The osseointegration success rate was 95.2% with a failure rate of 4.8%. Failure particularly affected the irradiated patients. Excellent functional and aesthetic results were obtained with the iliac crest free flap, nasolabial flap and osseointegrated dental implants. CONCLUSIONS: This technique has several advantages. On the one hand, it enables reconstruction of the original dimensions of the mandible, thus allowing immediate placement of implants in an ideal position for subsequent rehabilitation with a dental prosthesis. On the other hand, the nasolabial flap provides a thin layer of tissue that can be used to reconstruct the anatomy of the oromandibular soft tissue.

Osteotomía distal mandibular y fractura en tallo verde / No disponible

No disponible

Síndrome de Binder. ¿Cuál es el tipo idóneo de cirugía? / Binder syndrome. What type of surgery is ideal?

No disponible

Cavidad ósea idiopática de Stafne. Diagnóstico y manejo / Stafne idiopathic bone cavity. Diagnosis and management

No disponible